
Do Roger Dubuis Excalibur Super Clones Use a Real Mechanical Flying Tourbillon?
Yes; Tier-1 Roger Dubuis Excalibur Spider builds from BBR Factory and JB Factory house a genuine hand-wound mechanical flying tourbillon rotating once every 60 seconds at 7 o’clock, cantilevered from underneath without an upper bridge and framed by the signature Astral star-shaped skeleton mainplate. Street-grade fakes cut a round hole in a cheap automatic dial to expose an oscillating balance wheel (“open-heart”) that merely rocks back and forth without rotating its escapement cage. Every piece inside the Roger Dubuis super clone collection carries a true co-axial rotating carriage holding the balance wheel, hairspring, pallet fork, and escape wheel together to average out positional gravity errors.
Machining an Excalibur Spider case demands multi-axis CNC milling that most standard watch factories refuse to touch. You have triple lugs hollowed out along their flanks, a notched fluted titanium or DLC bezel, and a flange chapter ring suspended above open air.
How Does BBR Factory Compare Against JB Factory on the Excalibur Spider?
BBR Factory wins on slim case thickness (13.8mm vs 14.6mm), sharper Celtic-cross tourbillon cage finishing, and true RD505SQ/RD820SQ star-bridge geometry, whereas JB Factory focuses on twin-tourbillon and heavy 45mm to 47mm carbon/titanium colorways with slightly thicker casebacks. Review the side-by-side engineering breakdown below before selecting an openworked reference.
| Engineering Feature | BBR Factory Excalibur | JB Factory Excalibur |
|---|---|---|
| Tourbillon Architecture | True 60-second cantilever flying tourbillon (Celtic cross cage) | True 60-second flying tourbillon (single & double cage models) |
| Beat Frequency & Reserve | 21,600 vph (3 Hz); 56 – 60 hours manual wind | 21,600 vph (3 Hz); 48 – 54 hours manual wind |
| Astral Star Bridge | Sandblasted anthra-grey bridges with hand-polished anglage | CNC skeletonized bridges; slightly thicker bridge arms |
| Case Material | Grade 5 Titanium, Black DLC Titanium, or Forged Carbon | Grade 5 Titanium, Rose Gold PVD, or Carbon Fiber |
| Case Diameter & Profile | 45 mm / 47 mm x 13.8 mm | 45 mm / 47 mm x 14.6 mm |
| Strap & Buckle | Vulcanized rubber inlay leather/mesh; Titanium deployant clasp | Molded rubber-leather hybrid; folding titanium clasp |
Which Excalibur Spider References Deliver the Cleanest Skeleton Proportions?
Single flying tourbillon references in black DLC titanium or brushed Grade 5 titanium keep the lightest wrist weight (under 98 grams) and preserve genuine negative space across the dial without crowding the star bridge. Within the Roger Dubuis Excalibur Spider lineup, the Roger Dubuis Excalibur Spider Flying Tourbillon RDDBEX0392 pairs red minute-track accents against matte black skeleton bridges so the spinning Celtic cross at 7 o’clock commands immediate attention. Buyers who prefer wider wrist presence choose the Roger Dubuis Excalibur Spider BBRF 47mm Manual-Wind Tourbillon or the streamlined Roger Dubuis Excalibur Spider Flying Skeleton; despite a 45mm to 47mm diameter, curved triple lugs pull the rubber strap straight down so the case hugs a 17.5cm wrist without overhang.
How Should You Wind and Inspect a Manual Flying Tourbillon Super Clone?
Wind the crown slowly clockwise for 28 to 32 half-turns until firm mechanical resistance stops the barrel — never force a manual-wind tourbillon past full stop because manual barrels use a fixed bridle rather than an automatic slipping clutch. During your 48-hour QC video check, watch one complete 60-second revolution of the flying tourbillon cage to confirm smooth concentric rotation without vertical wobble, and verify a 21,600 vph beat trace with beat error under 0.6 milliseconds.
Verified In-Stock 1:1 Timepieces Ready for 48-Hour Witschi QC

Rolex DateJust 41mm 126334 904L Green Motif Dial Jubilee VS3235

Rolex Oyster Perpetual 126000 36mm 904L Smooth Bezel Tiffany Ballon Blue Dial

Rolex Oyster Perpetual 126300 41mm 904L Smooth Bezel Tiffany Blue Ballon Dial
